DIL/NetPC DNP/5370: User Documentation

DNPSK28-FS.pdf: DIL/NetPC DNP/5370 User Information. Title: DNP/5370 Linux Starter Kit DNP/SK28: First Steps. This document describes the steps for the first use of the DNP/5370 DNP/SK28 starter kit with the DNP/EVA13 evaluation board. The document offers also some information for the host and development system setup.

DNP5370-HWR.pdf: DIL/NetPC DNP/5370 User Information. Title: DIL/NetPC DNP/5370 Hardware Reference. This document describes the DIL/NetPC DNP/5370 features, connectors, jumpers and pinouts. The document also offers a DNP/5370 block diagram, a component description and part location diagrams.

DNPEVA13-HWR.pdf: DIL/NetPC DNP/EVA13 Evaluation Board User Information. Title: DIL/NetPC DNP/EVA13 Hardware Reference. This document describes the DNP/EVA13 features, connectors, jumpers and pinouts. The document also offers a DNP/EVA13 block diagram and a component description. The DNP/EVA13 is a part of the DNP/SK28 starter kit.

pincount.pdf: DIL/NetPC Family User Information. Title: The DIL/NetPC DIL-64 and QIL-128 Pin Counting. The DIL/NetPC family members comes in different pin outs and form factors. This short document describes the pin count mechanism for the DIL-64 (DIL = Dual-in-Line) and the QIL-128 (QIL = Quad-In-Line) form factor.

u-boot-cmd.pdf: DIL/NetPC DNP/5370 User Information. Title: U-Boot Boot Loader Command Overview. The DNP/5370 boot loader - called "U-Boot" - offers a RS232 serial line- based command line interface. This short document shows a table with the DNP/5370 U-Boot commands. Please notice: The same boot loader is also used for the DIL/NetPCs DNP/2110 and (A)DNP/9200.

mHT5370-01.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to get Information’s about CPU Speed and available Memory. This short document describes how to use the Linux /proc file system for information's about CPU speed and available memory.

mHT5370-02.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to understand the DNP/5370 Boot Process with RCM enabled. Direct after power-up the DIL/NetPC DNP/5370 starts an automatic boot process from the on-board flash memory chip. This short document describes the two steps of the boot process if the RCM jumper (RCM = Remote Console Mode) is set (RCM enabled).

mHT5370-03.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to understand the DNP/5370 Boot Process with RCM disabled. Direct after power-up the DIL/NetPC DNP/5370 starts an automatic boot process from the on-board flash memory chip. This document describes the two steps of the process if the RCM jumper (RCM = Remote Console Mode) is not set (RCM disable).

mHT5370-04.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to use the DNP/5370 Python interpreter. The DIL/NetPC DNP/5370 Python interpreter comes pre-installed on a 128 Mbytes MMC (Multi- Media Card). This short document describes how to run this interpreter.

mHT5370-05.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to check the DNP/SK28 audio interface. This short document describes how to check the DNP/SK28 audio interface.

mHT5370-06.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to use the pre-build Blackfin GNU tool chain for DNP/5370 C Programming. This short document describes how to use the pre-build SSV Blackfin Linux GNU tool chain from your Linux-based PC environment for DNP/5370 C/C++ programming.

mHT5370-07.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to use the coLinux Tool Chain for DNP/5370 C Programming. This short document describes how to use the SSV coLinux tool chain from your Windows XP environment together with the GNU Blackfin cross tools for DNP/5370 C/C++ programming.

mHT5370-08.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to access a CSV data logging file with Microsoft Excel. This short document describes how to setup the DNP/5370 as a simple data logger for CSV-based data files and how to access these data files direct from a Microsoft Excel.

mHT5370-09.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to reformat the on-board 8 Mbyte NAND flash memory. This short document describes how to reformat the JFFS-based 8 Mbyte NAND flash disk with the DNP/5370 Linux build-in command flash_eraseall.

mHT5370-10.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to set the Real-Time Clock (RTC). This short document describes how to set the on-board RTC (Real Time Clock). The hardware-based RTC allows battery-backup real-time usage.

mHT5370-11.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to validating your HTML pages. If you are writing HTML code for the DIL/NetPC DNP/5370 web server, please make sure that the HTML is well-formed. This short document shows how to use the W3C (World Wide Web Consortium) validator service to check your HTML.

mHT5370-12.pdf: DIL/NetPC DNP/5370 microHOWTO. Title: How to install the SD card driver. The Linux O/S of the DIL/NetPC DNP/5370 comes with a preinstalled MMC driver. For using SD cards it is necessary to use the new SD card driver.This short document describes how to replace the old MMC driver by the new SD card driver.